Antiosmotic HS Epoxy Primer 3:2
Eigenschaften:
- 2-component high build epoxy primer.
- Does not contain laminate-penetrating solvents.
- Recommended for protecting yachts and boats below the waterline.
- Repairs osmotic bubbles formed in the laminate.
- Can apply up to 150 microns in one coat.
- Provides antiosmotic protection in two layers (300 um).
- Good flow gives a perfect finish.
- Easy to mix and apply.
- Caution: do not drip onto vertical surfaces.
- Cans contain components and room for mixing them.
- First layer: Raw surface, epoxy or polyester filler, epoxy primers, paint cleaned prior.
- Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
- Does not require sanding between coats while maintaining the suggested time interval.
Technische Daten:
- Type: GRP laminates, steel, aluminium
- Place: Above and below waterline
- Function: Filling Antiosmotic
- Application: brush, roll, spray gun
- Thinning: Not recommended (0 – 5 %)
- Theoretical coverage For 1l: 6-7 m2 for 150 μm WFT/ 150 μm DFT
- Number of coats: 1–4
- Pot life 20°C: 0,45 h
- Time between layers without sanding: 8 h – 72 h